Sliding Gate Motors
GR4 |
|
- Constructed in reinforced fibre or aluminium.
- For residential use.
- Available of 12-24 Vdc 220-230 Vac.
- Easy installation.
- For gates with maximum weight of 400 Kg.
- Strongly built and tested over time to guarantee long life.
- Available with raised carter housing for the transformer and central command unit (...12-24 Vdc).
- Design which integrates well with all tapes of gates.
- Available with magnetic encoder in all versions.
- Easy manual unlocking
- Permanent lubrication with grease.
- With or without central command unit.
|
GR8 |
|
- Constructed in reinforced fibre or aluminium.
- For residential or light industrial use.
- Available at 12-24 Vdc 220-230 Vac.
- Easy installation.
- For gates with maximum weight of 800 Kg.
- Strongly built and tested over time to guarantee long life.
- Available with raised carter housing for the transformer and central command unit (...12-24 Vdc).
- Version with 15m/min speed also available (12/24 Vdc).
- Design which integrates well with all tapes of gates.
- Available with magnetic encoder in all versions.
- Easy manual unlocking
- Permanent lubrication with grease.
- With or without central command unit.
|
GR12 |
|
- 12v Back up battery in case of power failure
- Reliable worm gear drive with manual override
- Built in PCB board with auto close function
- Soft start and stop
- Pedestrian mode
- Auto reverse in the event of an obstruction
- PCB terminal for button switch, infrared sensor, flash alarm, light options etc
- Solar Panel connection ready
|
DSL 500 & DSL 1000 (Made in Thaiwan) |
|
- 12v Back up battery in case of power failure
- Reliable worm gear drive with manual override
- Built in PCB board with auto close function
- Soft start and stop
- Pedestrian mode
- Auto reverse in the event of an obstruction
- PCB terminal for button switch, infrared sensor, flash alarm, light options etc
- Solar Panel connection ready
|
|
- Heavy duty AC design
- Reliable worm gear drive with manual override
- Built-in PCB board with auto close function
- Soft start and stop
- Thermal overload protection
- IP44 rated waterproof
- PCB terminal for button switch, infrared sensor, flash alarm, light options etc
- Commercial rated oil bath models available
|
-
Model
DSL 500
DSL 1000
-
Power Supply
240 Vac
240 Vac
-
Output Torque
7Nm
20Nm
-
Gate Weight
300 kg
500 kg
-
Motor Speed
DC12V/100W
1400r.p.m.
-
Gate Speed
9~14.5m/min
12m/min
-
Limit Switch
Magnetic
Spring or Magnetic
-
Noise
<52dB
<56dB
-
Backup Battery
12V/7Ah
AntennaElectronic PhotocellsControl BoxTransmitterExternal Key SwitchWarning Light